Polyester Bristle Brush 350mm Dia (Heavy Duty)

For use with Mini Pamper Hull Cleaning Machine.
4 rows of hard plastic bristles, for removing heavy slime and weed.
UMC ordering number 01231

Polyester Bristle brush 350mm Dia (Light Duty)

For use with Mini Pamper Hull Cleaning Machine.
4 rows of soft plastic bristles for removing light to medium slime and weed.
UMC ordering number 01225

Polyester Bristle Brush 280mm Dia

For use either with UMC Twin Brush Hull Cleaning Machine or UMC Hydraulic Hand Tool as single brush cleaning facility.
4 rows of soft plastic bristles for removing light slime and weed.
UMC ordering number 01212

Silicon Coating Cleaning Brush (RH) 350mm Dia

A brand new development from UMC, for use with Mini Pamper Hull Cleaning Machine. This brush has been developed to remove marine fouling from low surface energy coatings, without causing coating damage
UMC ordering number 01228

Silicon Coating Cleaning Brush (LH) 350mm Dia

A brand new development from UMC, for use with Mini Pamper Hull Cleaning Machine. This brush has been developed to remove marine fouling from low surface energy coatings, without causing coating damage
UMC ordering number 01229

Stainless Steel Wire Brush 350mm Dia

For use with Mini Pamper Hull Cleaning Machine.
5 rows of stainless steel wire for removing medium to heavy slime and weed and infantile shell growth.
UMC ordering number 01226

Stainless Steel Wire Brush 280mm Dia

For use either with UMC Twin Brush Hull Cleaning Machine or UMC Hydraulic Hand Tool as single brush cleaning facility.
4 rows of stainless steel wire for removing medium to heavy slime and weed and infantile shell growth.
UMC ordering number 01202

Twisted Wire Brush 350mm Dia

For use with Mini Pamper Hull Cleaning Machine.
3 rows of twisted wire for removing medium to heavy shell growth.
UMC ordering number 01115

Twisted Wire Brush 280mm Dia

For use either with UMC Twin Brush Hull Cleaning Machine or UMC Hydraulic Hand Tool as single brush cleaning facility.
3 rows of twisted wire for removing medium to heavy shell growth.
UMC ordering number 01114

Coach Bolt Brush 350mm Dia

For use with Mini Pamper Hull Cleaning Machine.
2 rows of coach bolts for removing very heavy shell growth.
UMC ordering number 01146

Coach Bolt Brush 280mm Dia

For use either with UMC Twin Brush Hull Cleaning Machine or UMC Hydraulic Hand Tool as single brush cleaning facility.
2 rows of coach bolts for removing very heavy shell growth.
UMC ordering number 01102

Propeller Polishing Coarse Pad 150mm Dia

For removing marine fouling and polishing to approx 2 microns CLA.(depending on prevailing propeller condition)
UMC order number 01402

Propeller Polishing Coarse Pad 150mm Dia

For removing marine fouling, including tenacious calcareous deposits, and polishing to approx 2 microns CLA.(depending on prevailing propeller condition)
UMC order number 01409

Propeller Polishing Fine Pad 150mm Dia

For administering final polish to approx 1 micron CLA. or better, (depending on prevailing propeller condition)
UMC order number 01405

P24 Grit Surface Preparation Disc 150mm Dia

For use with underwater surface preperation prior to underwater application of coatings and adhesives, and for use with propeller edge profiling.
UMC order number 01303